Ten Minute Video Training Library
[NJM Home Page | Table
of Contents | Ordering Information ]
Hand Safety
#288
HAND SAFETY — This program uses a series of dramatic interviews
with employees who have suffered hand injuries on the job. It emphasizes
the fact that it is necessary for employees to have a proper attitude toward
safety so that they will follow proper procedures. It also touches on the
topic that protective equipment such as gloves provide little benefit if
they are not worn when they should be. (10 Minutes)
#350
HAND SAFETY — This video program will familiarize trainees with
the different causes of injuries to the hands, fingers, and arms. It will
teach them appropriate ways to prevent these injuries. (8 Minutes)
#457
HAND PROTECTION — This video reviews the appropriate use of gloves. The different exposures and types of gloves to prevent the particular exposure are covered including 1) chemicals — latex, rubber, neoprene, nitrile, 2) heat and sparks — leather, 3) cuts and lacerations — stainless steel mesh, Kevlar, rubber, and leather, 4) electrical and, 5) general work gloves — cotton. The video ends with a general review of basic safety rules. (6:44 Minutes)
#488
FIRST AID: HANDS AND FINGERS — Do you know what to do if you or
someone around you suffers a hand injury? Cuts and lacerations are some
of the most common workplace injuries. This video discusses what to do
when a person cuts themselves including wearing protective gloves to prevent
bloodborne exposure, treatment procedures, cleanup and disposal of blood
and documentation of the incident. The video also discusses thermal burns
including the difference between 1st, 2nd, and 3rd degree burns. A brief
discussion of amputation and what to do with amputated parts is covered.
Finally, wearing protective gloves is reviewed. This video does contain
three graphic scenes of injured employees. (8:30 Minutes)
#740
KNIVES AND BOXCUTTERS — Knives disable more people than any other hand tool. Learn how to sharpen your skills, safely, when using knives and boxcutters. (5 Minutes)
#741
THE RIGHT TOOL — A tool that's the wrong size or is used in the wrong way won't get the job done and can lead to injury. Learn to select and use the right tool. (5 Minutes)
#742
HAND TOOL SAFETY — This video is a follow-up to #741, "The Right Tool." It alerts viewers to the potential hazards of simple hand tools and illustrates how common sense is the best tool of all. Screwdriver, hammer, wrench and ratchet safety are demonstrated. (5 Minutes)
#743
WHERE ARE YOUR HANDS? — Hand injuries account for a major portion of on-the-job accidents in today's workplace. This Safety Shorts video outlines the "dos" and "don'ts" of hand safety. (5 Minutes)
Check the Video Training Library
for more videos on Hand Safety