Video Training Library

  
[NJM Home Page | Table
  of Contents | Ordering Information ]

  
Slips, Trips and Falls

  
#291

  SLIPS, TRIPS & FALLS — Falls account for almost 400,000 workplace injuries each year. This videotape discusses action, awareness and attitude; identifying hazards; minimizing improper use of equipment, and ensuring simple housekeeping. (20 Minutes)


#345

  FALL PREVENTION: AVOIDING SLIPS AND FALLS — This program demonstrates that slips and falls usually occur when people move faster than conditions will allow. It also shows how people create tripping hazards or use equipment incorrectly, which can lead to slips and falls. The program clearly illustrates how to avoid these hazards on both walking and working surfaces. It also emphasizes the correct use of stairways, ramps, portable steps and ladders. (18 Minutes)

  
#346

  FALL PREVENTION: PERSONAL FALL PROTECTION — This video program
  describes the most common equipment for personal fall protection and explains
  the differences between fall prevention and fall arrest systems. The program
  presents a thorough discussion and demonstration of how to inspect and
  use harnesses, belts, lanyards, lifelines and anchors. This is an excellent
  video program for anyone who should be using either fall prevention or
  fall arrest systems. (22 Minutes)

			
#387

  SAFETY SENSE: SLIPS, TRIPS AND FALLS — This is an entertaining,
  yet informative presentation on causes of slips, trips and falls and ways
  to avoid such accidents. The effects of friction, momentum and gravity
  on our balance is discussed. The key elements in recognizing, avoiding
  and controlling workplace hazards which contribute to these accidents are
  covered as well. (14 Minutes)

			
#692

			SLIPS, TRIPS AND FALLS — The "Safety Crusaders" are in title competition. They demonstrate how to carry a load properly, give a list of common injuries from falls, and explain friction, momentum and gravity. In between challenges, a list of slip precautions is given, use of slip-resistant shoes is highlighted, and floor-cleaning methods, floor finishes and matting are reviewed. The basics of slip safety, clear pathways, trips when using elevated platforms, ladder safety and a scaffolding checklist are given. (17:25 Minutes)

  
#825

  FALL PROTECTION — THE RIGHT CONNECTION  — This videotape is an excellent review of fall protection systems such as lanyards, anchoring, full body harnesses and personal arrest systems. Also covered is the rescue of employees who have fallen. Having a competent individual to assess working conditions for proper fall arrest systems, inspecting fall equipment and proper rescue procedures as well having a written plan is also addressed in this video. (VHS and DVD FORMAT – 19 Minutes)




#851

PREVENTING SLIPS, TRIPS AND FALLS – This program highlights the causes of slips, trips and  falls, how to identify areas of hazard and how to prevent accidents from  occurring in general industry.  Using  preventative measures to avoid slips, trips and falls as well as responding to  accidents. (DVD FORMAT – 17 Minutes)


#862

SLIPS, TRIPS AND FALLS: TAKING THE RIGHT STEP – It may be hard to believe that slips, trips  and falls are among the leading causes of on-the-job fatalities, but it’s true.  Emphasize the importance of taking proper caution with the new training  program. When workers follow the precautions outlined, they will avoid  accidents that can cause serious injury. (DVD FORMAT – 18 Minutes)


#896

SLIPS, TRIPS AND FALLS — Slips and falls account for more than
200,000 on-the-job injuries in the U.S. each year. This fast-paced program identifies
major slip, trip and fall hazards that may endanger your employees. Topics covered
in this program include negotiating slippery surfaces, controlling hazards and
avoiding falls. DVD & VHS (14 Minutes)

  




Check the Ten-Minute Video Library
  for more videos on Slips, Trips and Falls